Glass and Mirror Works in Ireland
Glass and mirror work in Ireland covers a wide range of jobs, from replacing a cracked pane in a front door to fitting a made-to-measure mirror in a bathroom or a full shopfront. Because glass is cut, shaped and installed to suit the opening, most jobs cannot be priced over the phone. A glazier needs to see the frame, measure the opening and check how the glass will be fixed before giving a firm figure. That is why this work is quoted after a visit. Homeowners in counties like Cork, Galway, Limerick and Dublin often start by describing the job on ShamFix, then browse provider profiles and contact glaziers directly to arrange a site visit. The visit lets the trade confirm the type of glass, the thickness, whether toughened or laminated glass is needed, and how the new pane or mirror will be handled and fixed. Once measured, a written quote can be prepared. Posting a task on ShamFix costs nothing today. Your task stays open for 30 days. Providers registered in this category can see it.
What shapes the price of glass and mirror works
- The price of glass and mirror work depends on several things that only become clear after a visit.
- Size and volume matter: a single small pane costs less than a large sheet or several windows done at once.
- Access is a major factor.
- Ground-floor windows are straightforward, but upper-floor windows, roofs, or glass in tight internal spaces may need scaffolding, a tower or specialist lifting equipment.
- The condition of the existing frame is important too.
- Timber frames may be rotten or out of square, and uPVC or aluminium frames may need new gaskets or beading before new glass can be fitted.
- Materials also drive the cost.
- Ordinary float glass, toughened safety glass, laminated glass, low-iron glass for mirrors, and coloured or frosted glass all carry different prices.
- Mirrors add further choices: polished edges, drilled holes for fittings, and whether the mirror is to be fixed to the wall or set into a frame.
- Travel distance and parking in urban areas can also affect the quote.
- Because these factors vary so much, a written quote after a visit is the fairest way to compare prices.
How long glass and mirror works takes
Most glass and mirror jobs are measured at the first visit, then the glass is ordered and cut to size. Simple repairs, such as a single broken pane in a standard frame, can often be measured and fitted within a few days, depending on whether the glass is a stock size or made to order. Toughened glass and bespoke mirrors usually take longer because they are cut and processed to the exact measurements. A typical lead time for made-to-measure glass or a mirror is one to three weeks from the date of the visit, though this can vary by supplier and season. Larger jobs, such as replacing several windows or a full shopfront, may take longer to schedule and may need a second visit for fitting. Weather can affect external work, especially in exposed coastal counties. When you contact a glazier, ask for a realistic start date and a completion date in writing, and confirm whether the price holds if the job is delayed.
What to ask before you hire
- 01Before you accept a quote, ask for it in writing.
- 02A written quote should list the glass type and thickness, the size, whether it is toughened or laminated, and whether removal and disposal of the old glass is included.
- 03Ask if VAT is included in the figure and whether the quote is fixed or an estimate.
- 04Insurance is important: ask for a copy of the glazier's public liability insurance and check the cover is current.
- 05Ask which professional body this Glass and mirror works provider is a member of.
- 06For work at height or on a shopfront, ask how they will access the glass safely and whether they will use scaffolding or a mobile tower.
- 07Clarify who tidies up afterwards: who removes the old glass, packaging and any broken pieces, and who makes good the frame or surrounding plaster.
- 08Ask about the guarantee on the glass and on the fitting, and how long it lasts.
- 09Finally, ask when they can start and how long the job will take, so you can plan around it.
Glass and mirror works guides
All guides →
Explore other service categories that might interest you:
Glass and mirror fitting in Irish homes
Glass and mirrors can transform a room, from a toughened glass splashback in a new kitchen to a large wall mirror that brightens a narrow hallway. Many Irish homeowners get this work done during a kitchen or bathroom renovation, while landlords often need broken panes or shower screens replaced between tenants. Glass for splashbacks, shower screens and doors should be toughened safety glass, measured and cut to size. Post your task on ShamFix with measurements and photos, and compare quotes from glaziers and fitters in your area.
Glass and mirror jobs you can post
- Glass splashback fitting
- Bespoke wall mirror fitting
- Gym and dance studio mirrors
- Shower screen replacement
- Broken window pane replacement
- Glass shelving installation
- Glass table tops cut to size
- Mirrored wardrobe doors
- Glass balustrade panels
Glass and mirror questions
Should a glass splashback be toughened?
Yes. Splashbacks behind hobs should be toughened safety glass to handle heat and reduce the risk of breakage.
Who measures the glass?
Usually the fitter measures on site, especially for splashbacks with sockets that need cut-outs.
Can a large mirror be fixed to a plasterboard wall?
Yes, with the right fixings or adhesive. The fitter will check the wall first.
How long does it take to make a glass splashback?
Toughened glass is cut and processed to order, so there is usually a wait between measuring and fitting.
How much does mirror or glass fitting cost?
It depends on size, glass type and cut-outs. Compare quotes on ShamFix.
Glass and mirror works questions people ask
Can you replace just one pane of glass in a window?
Yes, a single pane can usually be replaced without changing the whole window. The glazier will measure the opening and check the frame is sound. If the frame is rotten or damaged, it may need repair first. The new pane is cut to size and fitted with new beading or putty as needed.
What is the difference between toughened and laminated glass?
Toughened glass is heat-treated so it breaks into small blunt pieces, which makes it safer for doors and low windows. Laminated glass has a plastic interlayer that holds the glass together when broken, so it stays in the frame. Your glazier will advise which is required for your situation.
Do I need to be at home for the glazier to measure?
Yes, it is best to be there for the initial visit. The glazier needs access to the window or the space where the mirror will go. They may also need to ask you about the frame, the fittings and how you want the finished job to look. If you cannot be present, arrange for someone you trust to let them in.
How long does it take to get a made-to-measure mirror?
A made-to-measure mirror is usually cut and finished to order, so allow one to three weeks from the time of measurement. The exact time depends on the glass type, the edge finish and the supplier's workload. Ask the glazier for a firm lead time in writing before you place the order.
Will the glazier take away the old glass and frames?
Many glaziers include removal and disposal of old glass in their quote, but not all do. Ask before you agree to the job. If removal is included, confirm whether they take away the old frame as well as the glass, and whether there is any extra charge for disposal.
What should I check on the written quote?
Check that the quote lists the glass type, thickness and size, whether it is toughened or laminated, and if VAT is included. Confirm whether removal and disposal are covered, and ask about the guarantee on both the glass and the fitting. Also check the start date and the estimated completion time.
Need glass and mirror works in Ireland?
Post a glass and mirror works task. Your task stays open for 30 days. Providers registered in this category can see it.
Post a glass and mirror works taskNo obligation to hire.Offer glass and mirror works on ShamFix
This listing is for glass and mirror works work in Ireland. Register so customers posting in this category can find your profile.
Register as a providerPosting a task on ShamFix costs nothing today.