ShamFixHire the people your neighbours trust.

Damp proofing and mould treatment Services in Galway

Post your task to get responses from damp proofing and mould treatment providers who may cover Galway, Ireland. Compare based on reviews.

Tasks Providers

How it works?Post a task Become a provider

Damp proofing and mould treatment Services in Galway

Galway, Ireland

Find damp proofing and mould treatment providers covering Galway, Ireland on ShamFix — a reviews-based marketplace. Post your task and compare provider profiles and replies to your specific job.

Browse wider area

Damp proofing and mould treatment in Galway

We do not list dedicated damp proofing and mould treatment profiles for Galway yet. Post your task to reach providers across Ireland who may cover your area.

Post a task Browse damp proofing and mould treatment across Ireland

Post your task and get responses from local providers across Galway. Free to post · 0% commission · you choose based on reviews.

Post a task

Frequently Asked Questions about Damp proofing and mould treatment in Galway

Damp Proofing And Mould Treatment Services in Galway Cities

Looking for damp proofing and mould treatment services in cities within Galway? Check out these locations:

Athenry

Ballinasloe

Related Services

Explore other service categories that might interest you:

Painting and decorating

Interior and exterior painting and decorating services

Demolition services

Demolition and removal services

Septic tank desludging

Septic tank desludging services

Recent Tasks

View all tasks

Swap electric scooter control board wiring - old to new part

1 day ago

My e-scooter's main control board (throttle/brake controller, YFS-Z1) has failed and I've bought a replacement. The new board has fewer wires/connectors than the old one - it only has a 4-pin power connector and a 5-pin display cable, while the old board also powered a headlight and possibly turn signals via extra connectors. I just need the scooter to be functional again: throttle, brake, and display working. I don't need the headlight or turn signals to work if that's not possible with the new board. Need help identifying which wires on the old harness correspond to battery power and display data, matching/splicing them to the new board's connectors, and safely capping off any unused wires (headlight etc). Have close-up photos of both boards and the wiring harness available to share. Scooter model: appears to use a Vicont display (VC-YB-QH-XMPro-V2.2) and YFS-Z1 controller board, 36V system.

Electric scooter repair

Galway city

Until 5 August 2026

€40

Active

0 responses

€40

Active

0 responses

Post a task

Become a provider

Tasks ProvidersHow it works?

Frequently Asked Questions about Damp proofing and mould treatment in Galway

Damp Proofing And Mould Treatment Services in Galway Cities

Looking for damp proofing and mould treatment services in cities within Galway? Check out these locations:

Athenry

Ballinasloe

Related Services

Explore other service categories that might interest you:

Painting and decorating

Interior and exterior painting and decorating services

Demolition services

Demolition and removal services

Septic tank desludging

Septic tank desludging services

Insulation and exterior works

Insulation and exterior construction services

Personal trainer

Personal training services

Car rental for events

Car rental for special events

Window and door installation

Window and door installation and repair

Electric scooter repair

Electric scooter repair services

Chimney cleaning and inspection

Chimney cleaning and inspection services

Window and door repair

Window and door repair services

Oil boiler servicing

Oil boiler servicing and maintenance

Stove and fireplace installation

Stove and fireplace installation services

Recent Tasks

View all tasks

Swap electric scooter control board wiring - old to new part

1 day ago

My e-scooter's main control board (throttle/brake controller, YFS-Z1) has failed and I've bought a replacement. The new board has fewer wires/connectors than the old one - it only has a 4-pin power connector and a 5-pin display cable, while the old board also powered a headlight and possibly turn signals via extra connectors. I just need the scooter to be functional again: throttle, brake, and display working. I don't need the headlight or turn signals to work if that's not possible with the new board. Need help identifying which wires on the old harness correspond to battery power and display data, matching/splicing them to the new board's connectors, and safely capping off any unused wires (headlight etc). Have close-up photos of both boards and the wiring harness available to share. Scooter model: appears to use a Vicont display (VC-YB-QH-XMPro-V2.2) and YFS-Z1 controller board, 36V system.

Electric scooter repair

Galway city

Until 5 August 2026

€40

Active

0 responses

€40

Active

0 responses

Damp proofing and mould treatment Services in Galway

Damp proofing and mould treatment Services in Galway

Damp proofing and mould treatment in Galway

How do I find damp proofing and mould treatment providers in Galway?

How does trust work on ShamFix for damp proofing and mould treatment providers?

How do I contact a damp proofing and mould treatment provider in Galway?

What should I look for when choosing a damp proofing and mould treatment provider in Galway?

Can I get quotes from multiple damp proofing and mould treatment providers in Galway?

Recent Tasks

Swap electric scooter control board wiring - old to new part

How do I find damp proofing and mould treatment providers in Galway?

How does trust work on ShamFix for damp proofing and mould treatment providers?

How do I contact a damp proofing and mould treatment provider in Galway?

What should I look for when choosing a damp proofing and mould treatment provider in Galway?

Can I get quotes from multiple damp proofing and mould treatment providers in Galway?

Recent Tasks

Swap electric scooter control board wiring - old to new part